Call Us Today: 419-549-8200
Call Us Today: 419-549-8200
Push the swift and beautiful blade out the front via a forced-assisted-action lever and let it charge your spirit with vigor! Assist the blade back in via pushing the same assisted lever again and like magic, the blade swiftly disappears. The Black blade has a Tanto blade, and is extremely sharp. The action features a safety to prevent accidentally opening the blade out against an object, which renders the action neutralized. To re-activate the action, push the lever up and pull on the blade and the knife will operate again with the same swift in-out action. The Tanto Point OTF Knife also features a tactical glass breaker and pocket clip.
MORE»| List | $39.99 |
6" 12 PC BLACK STREAK THROWING KNIFE SET MORE»
| List | $34.99 |
Features:
3-7/8 in. ALUMINUM SLIP JOINT W/CLIP YELLOW
The Bear & Son 110 is a Lightweight Slip Joint Drop Point with an Aluminum Handle. The Taper Ground 2-3/8" Drop Point Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The Bear & Son 110 has a hollow nail nick present to open the blade. The Bear & Son 110 has an overall length of 6-1/2" and is a good size to fit in the pocket and features a short pocket clip. The 110 weighs 1.9 ounces and is proudly made in the USA.
MORE»| List | $32.49 |
Specifications:
| List | $56.99 |
Specifications:
| List | $56.99 |
Specifications:
| List | $56.99 |
Specifications:
| List | $56.99 |
Specifications:
| List | $79.99 |
Specifications:
| List | $65.99 |
Specifications:
| List | $65.99 |
Specifications:
| List | $65.99 |
Features:
5 in. SILVER BUTTERFLY POWDER COATED TRAINER
The Bear & Son 110 is a Lightweight Slip Joint Drop Point with an Aluminum Handle. The Taper Ground 2-3/8" Drop Point Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The Bear & Son 110 has a hollow nail nick present to open the blade. The Bear & Son 110 has an overall length of 6-1/2" and is a good size to fit in the pocket and features a short pocket clip. The 110 weighs 1.9 ounces and is proudly made in the USA.
| List | $75.49 |
Specifications:
| List | $75.49 |
Features:
6-3/4 in. Rosewood Caper w/Leather Sheath
Model 2009R is a 2.4 ounce Caper designed with a Hollow Ground 2-1/2' 440 High Carbon Stainless Steel blade that is rust resistant, easy to sharpen, and holds an edge very well. The stainless-steel full tang handle is made from our popular Rosewood material with a nickel silver bolster. The curve of the handle and the jimping on the top of the blade allows for a secure grip making this knife perfect for bird hunting and other small game. This fixed blade everyday carry knife also features a brown leather sheath for belt carry. Model 2009R is proudly made in the USA.
| List | $68.99 |
Specifications:
| List | $57.99 |
Features:
4-1/8 in. Rosewood Trapper
The Bear & Son 254 is a Large Trapper with a Rosewood Handle. The Hollow Ground 3-1/8" Master Blade and 3-1/4" Spey Blade are made from High Carbon Stainless Steel, making them rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 4-1/8" Rosewood handle is designed with Stainless Steel Liners and Nickel Silver Bolsters. The Bear & Son 254 has the traditional slip-joint lock that is easy to open and close and nail nicks are present to open the blades. The Bear & Son 254 has an overall length of 7-3/8" and is perfect for those who like to trap small game. 254 weighs 3.6 ounces and is proudly made in the USA.
| List | $60.99 |
Features:
6 3/8 in. ROSEWOOD SMALL HUNTER W/LEATHER SHEATH
The new Bear & Son Cutlery 263R Small Rosewood Hunter is an American-made knife built for hunters and trailblazers. The 2-7/8-inch 440 stainless steel blade holds its edge, is easy to sharpen, and resists rust. The clip-point blade allows users to cleanly cut hard-to-reach places and serves as a general-purpose cutting tool. The Rosewood handle provides a traditional look, yet offers confident control with or without gloves. A nickel silver finger guard provides additional control for toughest jobs. A handmade leather sheath is included with the 263R Small Rosewood Hunter, and the knife comes with a Quality Leather Sheath.
| List | $65.99 |
Features:
3-3/4 in. Genuine India Stag Bone™ Lockback
The Bear & Son 505 is a Clip Point Lockback with a Genuine India Stag Bone™ Handle. The Hollow Ground 2-3/4" Clip Point Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 3-3/4" Genuine India Stag Bone™ Handle is designed with a Stainless Steel Liner and Nickel Silver Bolsters. The Bear & Son 505 has a positive lock to ensure that the blade remains firmly in place and a nail nick is present to open the blade. The Bear & Son 505 has an overall length of 7-1/2" and is a good size to fit in the pocket. 505 weighs 2.5 ounces and is proudly made in the USA.
| List | $79.49 |
Features:
4-1/8 in. Genuine India Stag Bone™ Trapper
MORE»| List | $185.99 |
Features:
9-1/4 in. Genuine India Stag Bone™ Fingergroove Skinner
MORE»
| List | $107.99 |
The Bear Edge Pattern 125 is an American built 4-1/4” silver Stainless Steel Assisted Sideliner. The hollow ground 3-1/2” blade is made from 440 stainless steel with a bead finish. The spring action and ball bearing washers allow the blade to open rapidly with a simple push up on the flipper. The 4-1/4” silver handle has a more sleek style but fits firmly in the hand allowing for a secure grip. Pattern 125 has a stainless-steel framelock to ensure that the blade remains firmly in place and is easy to close. A boot/pocket clip is also present that allows for a tip-up carry and quick access. A lanyard spacer is present on the back of the handle that is for secure fastening and storage. The open length for Pattern 125 is 7-1/2” and weighs 4.5 ounces. MORE»
| List | $69.49 |
Features:
4-1/2 in. Double Blade Guthook
MORE»| List | $56.99 |
Features:
3 in. Genuine Abalone Executive Lockback
The Bear & Son AB26 is a Clip Point Lockback with an Abalone Handle. The Hollow Ground 2-1/4" Clip Point Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 3" Abalone Handle is designed with Stainless Steel Liners and Nickel Silver Bolsters. The Bear & Son AB26 has the traditional slip-joint lock that is easy to open and close and a nail nick is present to open the blade. The Bear & Son AB26 has an overall length of 5-3/8" and is a good size to fit in the pocket. AB26 weighs 1.8 ounces and is proudly made in the USA.
| List | $114.99 |
Features:
2-1/2 in. Genuine Abalone Mini Executive Lockback
The Bear & Son AB40 is an Executive Lockback with an Abalone Handle. The Taper Ground 1-5/8" Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 2-1/4" Abalone handle is designed with Stainless Steel Liners and Nickel Silver Bolsters. The Bear & Son AB40 has the traditional slip-joint lock that is easy to open and close and a nail nick is present to open the blade. The Bear & Son AB40 has an overall length of 3-7/8" and is small enough to go unnoticed in a pocket. AB40 weighs 0.9 ounces and is proudly made in the USA.
| List | $96.99 |
Features:
5 in. Clip Point Butterfly
The Bear & Son G17B is a Butterfly Knife designed with the more modern G10 Handle. The Hollow Ground 3-1/2" Clip Point Blade is made from a High Carbon Stainless Steel that has a black coat finish. The Bear & Son G17B is designed without tang pins to allow for a smoother feel when flipping. The 5" G10 Handles feature Nickel Silver Bolsters on each end of the handles to add to its creative design. Brass washers are installed into the Handles for smooth opening and closing. The Bear & Son G17B is proudly made in the USA.
| List | $131.99 |
| List | $114.99 |
Specifications:
| List | $90.99 |
Features:
3 in. White Smooth Bone Little Toothpick Damascus
MORE»| List | $102.99 |
Beeman QB78S22 Synthetic Stock CO2 Powered .22 Caliber Bolt Action Air Rifle MORE»
| List | $113.95 |
PREMIER QUALITY AND ACCURACY FOR .22 CALIBER AIRGUN HUNTERS! SINGLE DIE PRODUCTION FOR EXCEPTIONAL SHOT-TO-SHOT CONSISTENCY.
ASSORTMENT INCLUDES 100 EACH OF THE HIGHEST QUALITY PELLETS:
DOMED MAGNUM 14.3 GRAIN
HOLLOW POINT 14.3 GRAIN
SUPER POINT 14.3 GRAIN
POINTED EXPANDING 14.3 GRAIN
| List | $15.99 |
Model/Item/Part - BU327. Buck Knives - Nobleman Framelock Folding Pocket Stainless Knife with Stainless Handles. 3 3/4" closed framelock. Stainless blade with thumb studs. Brushed stainless handles. Stainless pocket clip. Made in China.
MORE»| List | $48.38 |
Case presents its unique Gray Bone knives, distinguished by an additional Pocket Worn finish and Carbon Steel blades notable for their ease of sharpening. These knives demonstrate a comforting familiarity akin to faithful old acquaintances, eager to contribute with invaluable assistance at any given opportunity.
MORE»| List | $72.99 |
MORE»
•Available in 5 colors.
| List | $16.99 |
Our expandable batons are a great way to feel protected. This baton expands to 26” when full extended and collapses down to smaller size for easy storage in a purse or pack. Made of steel for a sturdy swing and includes a key ring to attach a wrist strap. Includes a handy carry pouch. Available in a 12" size too. MORE»
| List | $39.99 |
Cold Steel BENCHTOP KNIFE SHARPENER MORE»
| List | $159.99 |
Made from Japanese AUS10A Steel Steel, the Counter Point is highly corrosion and stain resistant and takes a very sharp and durable edge. The Counter Points handle is made from grivix and reinforced with heat treated aluminum liners, making it not only very strong, but comfortable and secure in almost any grip imaginable.
&return&&newline&
We spent years exploring high-end boot knives, and now we've applied that knowledge to a folding knife - the ColdSteel Counter Point. The Counter Point is available in three blade sizes - 3 inch, 4 inch and 6 inch. Their stiletto-inspired spear point blades have a distinctively pronounced false edge and a lustrous saten finish, combining to make a blade that not only looks great, but delivers a show stopping performance! Made from Japanese AUS10A Steel, the Counter Point is highly corrosion and stain resistant and takes a very sharp and durable edge. The Counter Points handle is made from grivix and reinforced with heat treated aluminum liners, making it not only very strong, but comfortable and secure in almost any grip imaginable. For added strength and safety, we equipped the Counter Point with our famous tryad locking mechanism, proven again and again to be incredibly strong and shock resistant.
&return&&newline&
Specifications:
&return&&newline&
| List | $119.99 |
*Limited run and serialized* All new for 2020, the Gunsite Counter Point. It's stiletto-inspired spear point blade has a distinctively pronounced false edge with jimping and a wicked half serrated blade, combining to make a blade that not only looks great, but delivers a show stopping performance!
MORE»| List | $129.99 |
our Counter TAC boot knives were designed with one simple philosophy in mind. Functionality. Quite simply - they work, and they excel at what they do! Their sharp, AUS 8A full-tang blades are vacuum heat treated, and sub-zero quenched for strength and durability. The ergonomic design of the Kray-Ex ™ handle is comfortable and adaptable to any grip, and the deeply textured surface and double guard will insure that the knife is not likely to slip from your hand under any circumstances. Finally, each Counter TAC is shipped with a state of the art Secure-Ex® sheath, complete with a removable boot/belt clip and lashing slots so you can carry it just about anywhere.
Specifications:
| List | $79.99 |
our Counter TAC boot knives were designed with one simple philosophy in mind. Functionality. Quite simply - they work, and they excel at what they do! Their sharp, AUS 8A full-tang blades are vacuum heat treated, and sub-zero quenched for strength and durability. The ergonomic design of the Kray-Ex™ handle is comfortable and adaptable to any grip, and the deeply textured surface and double guard will insure that the knife is not likely to slip from your hand under any circumstances. Finally, each Counter TAC is shipped with a state of the art Secure-Ex® sheath, complete with a removable boot/belt clip and lashing slots so you can carry it just about anywhere.
Specifications:
| List | $54.99 |
The Hold Out's beautiful satin polished blades are extremely broad; they are flat ground from the spine, with a shallow "V" cross-section culminating in a razor-sharp hand-honed edge. Continuously curved from the heel to the needle-sharp tip, the blade cuts, and shears through tough and fibrous material with ease and makes short work of tasks that would challenge many of the folding knives on the market today. Its American G10 handle is a wonder of ergonomic design. Allowing a full and secure four-finger grip. It is wonderfully secure in the hand and will not roll or twist with use. The grip enhancing G10 and handle holes further aid traction in a wide range of grips, working equally well tip up, down in an "ice pick" grip, or even held like a push dagger! Incredibly thin and flat, with an ambidextrous pocket clip designed for deep carry, even the largest of the Hold Out series is easily concealed in a pocket, clipped into a waistband, or tucked into a boot. The blade and handle geometry and the positioning of the Tri-Ad lock in the Hold Outs came together perfectly. Working together to create a knife whose strength versus weight ratio stunned even Cold Steel's own research and development team!
MORE»| List | $137.99 |
The Hold Out's beautiful satin polished blades are extremely broad; they are flat ground from the spine, with a shallow "V" cross-section culminating in a razor-sharp hand-honed edge. Continuously curved from the heel to the needle-sharp tip, the blade cuts, and shears through tough and fibrous material with ease and makes short work of tasks that would challenge many of the folding knives on the market today. Its American G10 handle is a wonder of ergonomic design. Allowing a full and secure four-finger grip. It is wonderfully secure in the hand and will not roll or twist with use. The grip enhancing G10 and handle holes further aid traction in a wide range of grips, working equally well tip up, down in an "ice pick" grip, or even held like a push dagger! Incredibly thin and flat, with an ambidextrous pocket clip designed for deep carry, even the largest of the Hold Out series is easily concealed in a pocket, clipped into a waistband, or tucked into a boot. The blade and handle geometry and the positioning of the Tri-Ad lock in the Hold Outs came together perfectly. Working together to create a knife whose strength versus weight ratio stunned even Cold Steel's own research and development team!
MORE»| List | $254.99 |
Specifications:
Rail thin, feather light, and flat like a pancake, our Secret Edge is suitable for anyone in the market for an unobtrusive, yet highly effective neck knife. Unlike its heavier, bulkier rivals, the Secret Edge is so slim it virtually disappears under clothing and, at 3.2 ounces (including sheath) is a joy to wear without causing neck fatigue.
Inspired by the ancient Scottish Skean Dhu, it's thoroughly modern in materials, performance and appearance, and presents a flat ground Japanese AUS 8A Stainless blade that's wide at the base for cutting power and narrow at the tip to assure effortless penetration. The edge is so murderously sharp it will astound your family and friends.
And, to assure maximum purchase in such a diminutive blade, the Secret Edge is equipped with an exceptionally thin, flat faux G-10 handle. It has three holes, to reduce weight, and an aggressively textured surface, so it hugs the palm and resists rolling or twisting in the hand.
For safety, and to prevent loss, the Secret Edge comes with a correspondingly slim Secure-Ex™ sheath. It offers reliable retention without compromising speed of access or deployment
| List | $44.99 |
ColdSteel has been making push knives for over a quarter century. Over the years we have continually refined our designs, discarding some features and enhancing others. Constantly striving to produce the best push knife in the world. our Safe Maker series represents the pinnacle of our learning, experience, testing, and development. The blades, shafts, and 'T' shaped tangs are fashioned from one solid piece of Japanese auseighta Stainless Steel with a stone washed finish, and then subsequently vacuum heat treated and sub-zero quenched for added strength and performance. A textured Kray-Ex handle encapsulates the tang and part of the shaft for added comfort and security. Available in two sizes; each Safe Maker includes an easily concealable and sturdy Secure-Ex boot/belt sheath.
Specifications:
| List | $69.99 |
ColdSteel has been making push knives for over a quarter century. Over the years we have continually refined our designs, discarding some features and enhancing others. Constantly striving to produce the best push knife in the world. our Safe Maker series represents the pinnacle of our learning, experience, testing, and development. The blades, shafts, and 'T' shaped tangs are fashioned from one solid piece of Japanese auseighta Stainless Steel with a stone washed finish, and then subsequently vacuum heat treated and sub-zero quenched for added strength and performance. A textured Kray-Ex handle encapsulates the tang and part of the shaft for added comfort and security. Available in two sizes; each Safe Maker includes an easily concealable and sturdy Secure-Ex boot/belt sheath.
Specifications:
| List | $54.99 |
Features:
| List | $379.99 |
3V Master Tanto 11 1/2" Overall 6" CPM 3-V Steel Blade 3/16" Thick 5 1/2" Long Kray-Ex™Handle Sheath
MORE»| List | $349.99 |
Specifications:
Our Japanese San Mai III® blades have been a ColdSteel staple for decades. Coveted by Martial Artists and knife collectors alike, they are still much in demand, but these luxury fixed blades are only produced in very limited numbers.With this in mind, we created the Nightfall Series - Made with the same level of quality and attention to detail as our Japanese classics but trading San Mai® for premium American CPM 3V powdered super steel. The CPM 3V Magnum Tanto XII is honed to a screamingly sharp edge.
MORE»| List | $449.99 |
Specifications:
our classic San Mai III® fixed blades have been a ColdSteel staple for decades. Coveted by Martial Artists and knife collectors alike, they are much in demand, but these high-end luxury fixed blades are only produced in exclusive limited edition runs each year.
Therefore, we are proud to introduce our new Nightfall Series of Japanese styled blades made from American CPM 3-V high performance powdered steel - with the same design and attention to detail as our much loved San Mai classics but with the addition of this premium American super steel, we're excited to usher in a new era of high performance fixed blades for the discerning knife owner.
Each of these tough, reliable blades is DLC (diamond like) coated to a rich inky black finish. Highly scratch and wear resistant, and honed to an edge that you would expect on the keenest of razor blades, they are not only super sharp, but built to last!
| List | $389.99 |
Designed by Andrew Demko, the AK-47 Field Knife is enormously sturdy. Expertly crafted from CPM3-V steel, the AK-47 Field Knife with a stonewashed finish from the tip of its beefy saber ground clip point blade through its full tang and integral steel pommel ensuring and hard wearing, super tough finish.Supplied with a versatile Secure-Ex sheath, the AK-47 Field Knife is the perfect companion for today's modern Military personnel.
Specifications:
| List | $234.99 |
Awesome is the only adjective that even begins to describe the Cold Steel Laredo Bowie. In fact, it really has to be seen to be appreciated, since mere words just don't do it justice. It features a long, heavy blade made from CPM-3V tool steel blade construction, which is flat ground to produce incredible cutting power and perfect balance. And, as an added bonus, it is given an absolutely ferocious cutting edge that terminates in a dagger-sharp point. To further enhance its versatility and efficiency as a weapon, it sports a four and a half-inch long sharpened clip point that helps facilitate the deadly back cut, as well as a wide variety of more conventional cuts and stabbing attacks. The black G10 handle is as tough as it is beautiful. It is specially contoured to fit the hand like a glove and to provide a positive grip when cutting, chopping, or thrusting. Each Laredo Bowie is supplied with a Secure-Ex sheath to protect the blade and allow you to wear it safely and securely on your side always ready to defend you and your loved ones.
MORE»| List | $569.99 |
The broad clip point of the blade of the Trail Master is extremely resistant to bending or breaking. This is largely due to the fact that the tip is actually thicker near the point than what is seen on competitor's knives. This, however, does not mean that the point is dull or blunt. On the contrary, the point is almost needle sharp and offers tremendous penetration. Plus, the blade-back is equipped with a slightly concave false edge that measures approximately three and a half inches long. Every Trail Master's edge has been honed by hand, then given a high-speed buff until it is truly razor sharp and capable of easily shaving the hair off one's arm. This knife is so sharp it will cut at the slightest touch. The Trail Master balances approximately 3/4" in front of the guard for a slightly blade-heavy feel that is ideal for delivering heavy chopping and slashing strokes. The Trail Master's Kray-Ex handle is 5" long and deeply checkered for a non-slip, shock-absorbing grip. What's more, its contoured cross-section helps prevent the knife from shifting or turning in the hand when striking full power blows. The double guard is very sturdy and rigidly fixed into place. It is long enough to keep fingers off the blade, yet short enough to avoid being tangled in clothing or equipment when the Trail Master is drawn.
MORE»| List | $539.99 |
Why buy a Trail Master®?
That's simple. Because it is, without a doubt, the most knife for the money ever commercially built! In terms of sharpness, edge holding and strength, it will out perform "by a wide margin" any factory made knife known of and 99% of all hand forged knives as well! We know we're "going out on a limb" with that statement, but since 1987 we have challenged the industry to make a better knife and yet, to this day, we've had no takers. So before you spend your hard earned bucks on one of our competitor's knives, take a moment to review all the advantages offered by the ColdSteel® Trail Master.
Style and Construction:
The broad clip point of the blade is extremely resistant to bending or breaking. This is largely due to the fact that the tip is actually thicker near the point than what is seen on our competitor's knives. This, however, does not mean that the point is dull or blunt. On the contrary, the point is almost needle sharp and offers tremendous penetration. Plus, the blade-back is equipped with a slightly concave false edge that measures approximately three and a half inches long. Every Trail Master's® edge has been honed by hand, then given a high speed buff until it is truly razor sharp and capable of easily shaving the hair off one's arm. This knife is so sharp it will cut at the slightest touch. The Trail Master® balances approximately 3/4" in front of the guard for a slightly blade-heavy feel that is ideal for delivering heavy chopping and slashing strokes. The Trail Master's® Kray-Ex™ handle is 5" long and deeply checkered for a non-slip, shock absorbing grip. What's more, its contoured cross section helps prevent the knife from shifting or turning in the hand when striking full power blows. The double guard is very study and rigidly fixed into place. It is long enough to keep fingers off the blade, yet short enough to avoid being tangled in clothing or equipment when the Trail Master® is drawn.
VG-1 San Mai III® blade:
If you want a Bowie knife that requires minimum maintenance and is practically immune to water, salt, air, or the humidity of a jungle environment, the San Mai® Trail Master® is for you! This Bowie will outperform any other Stainless Steel Bowie in the world in terms of strength and toughness. And, as an added bonus, this Trail Master® is equipped with a beautiful rolled edge, capable of easily severing 4" or more of free hanging manila rope!
| List | $499.99 |
The ColdSteel Kobun is a lightweight knife that takes its name from the Japanese underworld, where the word “Kobun' is sometimes used as an indicator of rank that suggests the word “soldier', or one who takes orders from his “Oyabun' or boss. It's a fitting name for a knife like the Kobun, which was effectively designed to be “a good soldier'. Proven to be incredibly popular with the Military, where it's prized for its light weight and discreet profile as much as its durability and cutting potential. The Kobun features ColdSteels iconic reinforced “American Tanto' point, making it highly resistant to bending or breaking because it is reinforced by the full thickness of the blade's spine (which runs almost to the very tip of the blade). Despite its thin profile, the Kobun's deeply checkered Kray-Ex handle is designed to offer maximum grip and is contoured to resist turning or shifting in the hand.
&return&&newline&
Specifications:
&return&&newline&
| List | $79.99 |
Specifications:
The ColdSteel Kobun is a lightweight knife that takes its name from the Japanese underworld, where the word “Kobun' is sometimes used as an indicator of rank that suggests the word “soldier', or one who takes orders from his “Oyabun' or boss. It's a fitting name for a knife like the Kobun, which was effectively designed to be “a good soldier'. Proven to be incredibly popular with the Military, where it's prized for its light weight and discreet profile as much as its durability and cutting potential. The Kobun features ColdSteels iconic reinforced “American Tanto' point, making it highly resistant to bending or breaking because it is reinforced by the full thickness of the blade's spine (which runs almost to the very tip of the blade). Despite its thin profile, the Kobun's deeply checkered Kray-Ex handle is designed to offer maximum grip and is contoured to resist turning or shifting in the hand.
MORE»| List | $79.99 |
The ColdSteel Bird & Game is a must-have lightweight knife that's the perfect option for when weight is truly a factor. It's simple, full tang construction belies a multitude of design nuances that will soon become apparent to any hunter, survivalist or outdoorsman. Simply put, once this knife is in your hand - you'll love it! Inspired by our much-loved Bird & Trout Knife, and taking design-cues from our Spike series, the Bird & Game is designed for small game use, but is more than capable of processing large game in a pinch. The integral finger ring (coupled with the textured polymer handle scales) allows the wielder to keep a secure grip on the blade, and even let it hang from a finger while working on particularly intricate or delicate tasks. The Bird & Game's razor sharp Japanese auseighta blade has been expertly heat treated for durability, while still being a breeze to re-sharpen in the field. Weighing in at a meager 1.4 oz., the Bird & Game is an inexpensive, super lightweight hunting tool that can be stowed in a bag or pack, or even hung from a chain around your neck.
&return&&newline&
Specifications:
&return&&newline&
| List | $35.99 |
Specifications:
The Bird & Trout Knife is a modern version of a 100 year old classic, treasured by hunters and fishermen for generations. The secret to its enduring popularity is its ultra slim profile, and unique all steel construction. The skeletonized handle offers great versatility and freedom of movement. It's perfect for working in tight places or making precise cuts. The ring allows the knife to hang from the little finger when not in use and yet remain instantly available. The Bird & Trout is made out of AUS 8A Stainless Steel. For safety and handiness, each knife comes with a light weight Concealex neck sheath and steel bead chain lanyard.
MORE»| List | $29.99 |
